1 video(s) found
| Internal Working Dimensions | 22″ W x 25″ D x 28″ H |
| Power | 110V or 220V Single Phase |
| Abrasive Amount | 13lbs. |
| Water Amount | 9.5 Gallons |
| Gun Tips | Boron Carbide Blasting Gun Tips |
| Compressor | 5 HP or Larger Air Compressor |
| Pump | High Volume Slurry Pump |
| Pump Impeller | Industrial Polyurethane Pump Impeller |
| CFM | 20-30 CFM |
| PSI | 80-90 PSI Max Pressure |
| Assembly | No Assembly Required |
-
Bench Top Vapor Hone 650 is backed by the industry’s best LIFETIME WARRANTY
-
100% built in the USA
-
American tech support Monday – Friday
-
Industrial machine built to last a lifetime
-
Foot pedal operates blasting
-
Top load door saves space
-
LED lighting for better visibility
-
Boron Carbide blasting gun inserts
-
Durable 40 mil thick seamless rubber gloves
-
Durable Lexan window for easy replacement
-
This machine is neither a closed loop or open loop machine. You simply fill the machine with 9.5 gallons of water and 13lbs of abrasive and the machine will reuse this material
-
Example of inside lighting
-
Standard regulator
-
1/4″ NPT air connection is needed
-
Simplistic controls and components
-
Top ball valve is for only draining water in the event the abrasive is still good for reuse but the water has become dirty
-
Bottom ball valve drains both water and abrasives
GET YOURS TODAY
Built tough and small but still gets the job done quickly.
Zack M
Iowa
Love the bench top size of the machine. Its built well and surprisingly heavy for its size.
Sam S
California
- What’s the regular maintenance on vapor blasters as a whole?
- How often do I change media and water?
- Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heating?
- What abrasives can I run in the vapor hone?
- Does vapor honing take a lot of CFM?
- Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.
- If you use it every other day I would change every month. If its occasional use you might go 2 – 3 months.
- One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing anything other than water and abrasive because it can create bad finishes if it throws out the PH of the slurry.
- Any abrasive that you run in a dry blasting cabinet will run in a vapor hone machine.
- It depends on what you define as a lot any wet cabinet can need 15-45 CFM to operate just depends on what machine model you choose.
If you like to see other machines in action or our before and after results, please visit our YouTube channel and subscribe
Click Below
