fbpx

Equipment Specs

Internal Working Dimensions 24” W x 18″ D x 20″ H
Power 110V Single Phase
Abrasive Amount 12 lbs. of Abrasives
Water Amount To Top Ball Valve
Compressor Specs Shop Compressor
CFM 20 – 30 CFM
PSI  60 – 100 PSI
Assembly Only for Stand & CL Variants
  • Our Bench Top VH700 is 100% built in the USA
  • American tech support Monday – Friday
  • Fully factory tested
  • Small machine footprint for easy placement in your busy workshop
  • Tough and rugged HDPE designed cabinet will last a lifetime
  • 14 Gauge metal powder coated base for great machine support and long life
  • Foot petal operates blasting gun for easy process control
  • Comes with standard regulator
  • Standard plastic pump impeller
  • 1x LED flood light
  • Window rinse to clean abrasives off window
  • Off and On switch located in the back
  • Easy to handle wet blast nozzle provides maximum comfort and optimum performance
  • Front 3/4″ NPT hopper drain valve for easy abrasive change out
  • Service connections are located on the rear
  • Large durable Lexan window
  • Durable 40 mil thick seamless rubber gloves
  • Clear visibility of the entire blasting chamber for easier processing
  • Accommodates 85% of normal parts
  • Backed by our true lifetime warranty
  • Ships UPS for economic shipping
  • Packed full of capability

Optional Closed Loop Upgrade

  • Allows for closed loop wet blasting and placement truly anywhere
  • Best choice if your process requires corrosion inhibitor
  • Stand and machine ship assembled, must place on top of stand
  • Creates a stand alone unit
  • Extends the lifespan of your abrasive
  • Allows for tighter process control

Get Started Vapor Honing!

The VH700 may be smaller in size, but it’s big on delivering exceptional results for hobbyists and enthusiasts. Crafted by Vapor Honing Technologies, this compact powerhouse brings professional-grade surface treatment to your workshop. Say goodbye to labor-intensive methods and open the top load lid to efficiency and precision. We can not wait to see what you will do!

Ready to make your projects shine? 

 

Don’t forget your blasting abrasive!

For any questions, please call 828-202-5563

VH700 Dimensions

The VH700: Small Machine, Big Power

How To Set Up The VH700

How To Add Abrasive To The VH700

Take A Look Around The VH700!

your 360 images

Testimonials

Was able to bring my project bike back to life with this little machine. Very impressed with its operation and results! Also, the closed loop add-on was definitely worth it because I can stick it anywhere.

Nick B,

Tennesse

Budget friendly machine for all of us hobbyist while still getting a high level of customer support when needed.

Harry G,

Canada

I was impressed by the capability of this machine. I wasn’t expecting such nice results to come so easily. Setup was super easy, and I am able to do around 6 carbs in 2 hours. Super Stoked! Abrasive change out is actually kind of easy because you can tilt the machine.

Robert B,

Ohio

I have been working on a 1970 Honda cb350 so I purchased this machine to finish some odd and in pieces on it. After seeing how well the carb and side cover turned out, I want to vapor blast EVERYTHING. Cant wait to use it more, and I may add a VH800 to my lineup soon!

Oliver S,

Maine

Frequently Asked Questions

Q. What’s the regular maintenance on vapor blasters as a whole?

Q. How often do I change media and water?

Q. Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heating?

Q. What abrasives can I run in the vapor hone?

Q. Does vapor honing take a lot of CFM?

A.  Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.

A. If you use it every other day I would change every month. If its occasional use you might go 2-3 months.

A. One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing any thing other than water and abrasive because it can create bad finishes if it throws out the PH of the slurry.

A. Any abrasive that you run in a dry blasting cabinet will run in a vapor hone machine.

A. It depends on what you define as a lot any wet cabinet can need 15-45 CFM to operate just depends on what machine model you choose.

If you would like to see other machines in action, or our before and after results, please visit our YouTube channel and subscribe
Click Below
lifetime warranty
design in USA
SiteLock