| Internal Working Dimensions | 36″ W x 30″ D x 38″ H |
| Power | 110V Single Phase |
| Abrasive Amount | 32 lbs. |
| Water Amount | 22.5 Gallons |
| Pump | High Volume Slurry Pump |
| Pump Impeller | Standard Plastic Pump Impeller |
| Gun Tips | Boron Carbide Blasting Gun Tips |
| Compressor Specs | 7.5 HP or Larger |
| CFM | 20-30 CFM |
| PSI | 60-100 PSI |
| Assembly | No Assembly Required |
Optional Features
Closed loop rinsing sedimentation tank (these tanks are industrial plastic tanks)
Rubber line walls for abrasion resistance and noise suppression
1,000 lbs. capacity stainless steel turntable
As of 3/12/24 the VH3630 will no longer include a wiper. Additionally, the LED bar will be replaced with two 18″ LED lightbars.
-
The Econoline 3630 Vapor Hone is backed by the industry’s best LIFETIME WARRANTY
-
100% built in the USA
-
American tech support Mon- Fri
-
Fully welded tubular frame for machine support
-
Industrial machine built to last a lifetime
-
Large right side loading door
-
Fully welded stainless steel forklift slots
-
Foot switch operated blasting gun
-
Huge inside work area
-
Can fit most automotive parts
-
The Econoline 3630 is fully factory tested and assemble
-
1x LED flood light
-
Service connections are on the back of the machine
-
Standard Open Loop, Optional Closed Loop
-
Large window with great visablity
-
Durable 40 mil thick seamless rubber gloves
-
Internal rinse nozzle
-
Strong floor support
For the guy wanting something built with pride but not to break the bank. Cant go wrong with the Econoline series machines they are built to last and ship quickly for a custom hand made product.
Henry Jones,
North Carolina
If you are serious about your small business or even your hobby then the econoline series machine is for you. Built like a tank and backed by the industries best warranty. These guys are the real deal and have been on the block for around 8-9 years. I finally decided to purchase this for myself after watching their videos.
Steve Smith,
Florida
- What’s the regular maintenance on vapor blasters as a whole?
- How often do I change media and water?
- Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heating?
- What abrasives can I run in the vapor hone?
- Does vapor honing take a lot of CFM?
- Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.
- If you use it every other day I would change every month. If its occasional use you might go 2-3 months.
- One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing any thing other than water and abrasive because it can create bad finishes if it throws out the PH of the slurry.
- Any abrasive that you run in a dry blasting cabinet will run in a vapor hone machine.
- It depends on what you define as a lot any wet cabinet can need 15-45 CFM to operate just depends on what machine model you choose.
If you like to see other machines in action or our before and after results, please visit our YouTube channel and subscribe
Click Below
