-
Our Vapor Hone 3500 is backed up by the industry’s best LIFETIME WARRANTY
-
100% built in the USA
-
Machine exterior is painted White
-
American tech support Monday – Friday
-
Industrial machine built to last a lifetime
-
Model is built to last
-
Full access to entire inside of blasting cabinet with front load opening
-
LED lighting for better visibility
-
Boron Carbide blasting gun inserts
-
Foot switch operated blasting gun for easy control
-
Closed loop filtration basins located under machine to reduce overall footprint
-
Fully welded tubular frame for machine support
-
IP67 wash down industrial controls are mounted to the front of the machine
-
All equipment service connections are on the back of the machine
-
1/2″ NPT air connection
-
This machine is fitted with the optional closed loop filtration system
-
Fully factory tested and assembled
-
Precision air regulators on all industrial built machines from VHT
-
Quick and precise air adjustments can be made
-
Quick adjustment floor supporting system
-
Precision laser cut stainless steel to support weights in excess of 500lbs
-
Drop in supports can be easily adjusted for smaller or larger items
| Internal Working Dimension | 60″ W x 30″ D x 38″ H |
| Power | 110V or 200v Single or Three Phase |
| Abrasives Amount | 41lbs. of Abrasive |
| Water Amount | 29 Gallons |
| Pump | High Volume Slurry Pump |
| Gun Tips | Boron Carbide Blasting Gun Tips |
| Compressor Specs | 7.5HP or Larger |
| CFM | 20-30 CFM |
| PSI | 60-100 PSI |
| Assembly | No Assembly Required |
Optional Features
3K Sump heater
Closed loop rinsing sedimentation tank
Abrasive density meter
Rubber lined walls for abrasion resistance and noise suppression
1,000 lbs. capacity stainless steel turntable
Company Reviews
The Vapor blaster works just as i hoped it would. Killer finish and Ive been using it for 5 years. i made some mods A blasting pistol holder for
Where we
Vapor Honing Questions
1. What’s the regular maintenance on vapor blasters as a whole?
2. How often do I change media and water?
3. Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heating?
4. What abrasives can I run in the vapor hone?
5. Does vapor honing take a lot of CFM?
1. Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.
2. If you use it every other day I would change every month. If its occasional use you might go 2-3 months.
3. One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing any thing other than water and abrasive because it can create bad finishes if it throws out the PH of the slurry.
4. Any abrasive that you run in a dry blasting cabinet will run in a vapor hone machine.
5. It depends on what you define as a lot any wet cabinet can need 15-45 CFM to operate just depends on what machine model you choose.
