VH900

Automatic overflow valve
If you purchased a closed loop system, the basins will sit underneath the machine
Foot pedal operates the blasting gun for easy process and control



Internal Working Dimensions	36″ W x 24″ D x 30″ H
Power	110V Single Phase or 220V
Abrasive Amount	34 lbs.
Water Amount	24 Gallons
Pump	High Volume Slurry Pump
Nozzles	Standard Rinse Nozzle
CFM	20-30 CFM
PSI	80-90 PSI
Assembly	No Assembly Required

Automated Tumble Basket

22″ Turntable

HD Caster Kit

220V Single phase

Immersion Heater (220V)

Rubber lined wall to keep paints cleaner



What’s the regular maintenance on vapor blasters as a whole?
How often do I change media and water?
Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heater?
What abrasive can I run in the vapor hone?
Does vapor honing take a lot of CFM?

Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.
If you use it every other day I would change every month. If its occasional use you might go 2-3 months.
One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing any thing other than water and abrasive because it can create bad finishes if it throws out the PH of the slurry.
Any abrasive that you run in a dry blasting cabinet will run in a vapor honing machine.
It depends on what you define as a lot any wet cabinet need 15-45 CFM to operate just depends on what machine model you choose.