-
Our VH2000 is backed up by the industry’s best LIFETIME WARRANTY
-
100% built in the USA
-
American tech support Monday – Friday
-
Built of fully welded stainless steel and includes forklift slots to easily move the machine for servicing
-
Model is built to last
-
2 LED lighting bars for better visibility
-
Right side loading door
-
Boron Carbide blast gun inserts for long lasting performance
-
Foot switch operated blasting gun for easy process control
-
Simple Electrical box to simplify wiring process
-
Comes with GFCI 110V plug
-
Rinse nozzle is standard
-
The VH 2000 is fully factory tested and assembled before shipping
-
Machine exterior is painted White
-
Industrial quality at an affordable price
Internal Working Dimension | 40″ W x 40″ D x 40″ H |
Power | 110V Single Phase or 220V |
Abrasives Amount | 35lbs. of Abrasive |
Water Amount | 25 Gallons |
Pump | High Volume Slurry Pump |
Gun Tips | Boron Carbide Blasting Gun Tips |
Compressor Specs | 7.5HP or Larger |
CFM | 20-30 CFM |
PSI | 60-100 PSI Max Pressure |
Assembly | No Assembly Required |
Optional Features
Add-On Immersion Heater
Company Reviews
Vapor Honing Questions
1. What’s the regular maintenance on vapor blasters as a whole?
2. How often do I change media and water?
3. Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heating?
4. What abrasives can I run in the vapor hone?
5. Does vapor honing take a lot of CFM?
1. Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.
2. If you use it every other day I would change every month. If its occasional use you might go 2-3 months.
3. One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing any thing other than water and abrasive because it can create bad finishes if it throws out the PH of the slurry.
4. Any abrasive that you run in a dry blasting cabinet will run in a vapor hone machine.
5. It depends on what you define as a lot any wet cabinet can need 15-45 CFM to operate just depends on what machine model you choose.