| Internal Working Dimension | 25″ W x 25″ D x 28″ H |
| Power | 110V Single Phase |
| Abrasives Amount | 13lbs. of Abrasive |
| Water Amount | 9.5 Gallons |
| Pump | High Volume Slurry Pump |
| Pump Impeller | Polyurethane Pump Impeller |
| Gun Tips | Boron Carbide Blasting Gun Tips |
| Compressor Specs | 5HP or Larger |
| CFM | 20-30 CFM |
| PSI | 60-100 PSI |
| Assembly | No Assembly Required |
Optional Features
Rubber lined walls for abrasion resistance and noise suppression
-
Our VH685 is backed up by the industry’s best LIFETIME WARRANTY
-
100% built in the USA
-
All our machines comes with the upgrade without depreciation program
-
American tech support Monday – Friday
-
You have the option to choose the machine to be stainless steel or aluminum
-
LED lighting for better visibility (2′ light bar)
-
The VH685 is built to last
-
You have the option to choose the machine to be stainless steel or aluminum
-
Top load door and great spot for filming parts inside the machine
-
Rinse nozzle is standard
-
The VH685 is fully factory tested and assembled before shipping
-
Foot switch operated blasting gun for simple process control
-
Simple Electrical box to simplify wiring process
-
Comes with GFCI 110V plug
-
Standard regulator
GET YOURS TODAY
Nothing hobby or weekend about this machine very well built product.
Seth H,
Florida
Budget friendly machine for all of us hobbyist while still getting a high level of customer support when needed.
Harry G,
Canada
1. What’s the regular maintenance on vapor blasters as a whole?
2. How often do I change media and water?
3. Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heating?
4. What abrasives can I run in the vapor hone?
5. Does vapor honing take a lot of CFM?
1. Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.
2. If you use it every other day I would change every month. If its occasional use you might go 2-3 months.
3. One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing any thing other than water and abrasive because it can create bad finishes if it throws out the PH of the slurry.
4. Any abrasive that you run in a dry blasting cabinet will run in a vapor hone machine.
5. It depends on what you define as a lot any wet cabinet can need 15-45 CFM to operate just depends on what machine model you choose.
If you like to see other machines in action or our before and after results, please visit our YouTube channel and subscribe
Click Below
