-
Our Vapor Hone 4000 HD is backed up by the industry’s best LIFETIME WARRANTY
-
100% built in the USA
-
American tech support Monday – Friday
-
The VH4000 HD is built to last a lifetime
-
The dual station is an optional add on, single work station are standard
-
Large opening doors for easier machine access
-
Dual side door allows easier part loading or unloading and machine maintenance
-
Machine exterior is painted White
-
Door drip pans contain any door leaking and drain back into machine hopper
-
All equipment service connections are on the back of the machine
-
1/2″ NPT air connection is needed
-
VH4000 HD is fitted with the optional closed loop filtration system
-
Supports up to 1,000 lbs.
-
VH4000 HD is fully factory tested and assembled
| Internal Working Dimension | 60″ W x 48″ D x 38″ H |
| Power | 110V or 220v Single Phase |
| Abrasives Amount | 42lbs. of Abrasive |
| Water Amount | 30 Gallons |
| Pump | High Volume Slurry Pump |
| Gun Tips | Boron Carbide Blasting Gun Tips |
| Compressor Specs | 7.5HP or Larger |
| CFM | 20-30 CFM |
| PSI | 80-90 PSI |
| Assembly | No Assembly Required |
Optional Features
220V or 480V
3K Sump heater
Dual work station
Closed loop rinsing sedimentation tank
Abrasive density meter
Rubber lined walls for abrasion resistance and noise suppression
Track and car system for loading heavy parts
1,000 lbs. capacity stainless steel turntable
Great machine built with pride in the USA.
Jerry J,
Georgia
No surprises here along with quick customer service for my replacement parts.
Jimmy K,
Oregon
Company Reviews
Would highly recommend any of their products including the great media they sell also.
It has increased revenue by 50% on used parts and components
We have the weekend warrior machine
I would recommend this for anyone wanting to renew anything corroded or rusted to absolutely renew
Thank you Vapor Hone, JB
Vapor Honing Questions
1. What’s the regular maintenance on vapor blasters as a whole?
2. How often do I change media and water?
3. Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heating?
4. What abrasives can I run in the vapor hone?
5. Does vapor honing take a lot of CFM?
1. Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.
2. If you use it every other day I would change every month. If its occasional use you might go 2-3 months.
3. One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing any thing other than water and abrasive because it can create bad finishes if it throws out the PH of the slurry.
4. Any abrasive that you run in a dry blasting cabinet will run in a vapor hone machine.
5. It depends on what you define as a lot any wet cabinet can need 15-45 CFM to operate just depends on what machine model you choose.
