| Internal Working Dimensions | 17″ W x 13″ D x 13″ H |
| Power | No Power Needed |
| Abrasive Amount | 5 lbs. of Abrasives |
| Water Amount | 2 Gallons |
| Compressor Specs | Small Shop Compressor |
| CFM | 10-15 CFM |
| PSI | 60-100 PSI |
| Assembly | No Assembly Required |
-
Our Micro Vapor Hone is 100% built in the USA
-
American tech support Monday – Friday
-
Easy to handle wet blast nozzle provides maximum comfort and optimum performance
-
Tough and rugged HDPE designed cabinet will last a lifetime
-
14 Gauge metal powder coated base for great machine support and long life
-
Front 3/4″ NPT hopper drain valve for easy abrasive change out
-
Pull/ Push air switch for easy blast gun operation
-
Space saving design allows for easy location on your workbench or roll cart
-
Small machine footprint for easy placement in your busy workshop
-
Fully factory tested and assembled
-
Service connections all located on one side for easy hookup
-
Comes with standard regulator
-
High performance pneumatic pump is fitted in the back for easy maintenance
-
All service supplies are located on the back of the cabinet for easy access
-
Machine is designed to run completely off of compressed air no power needed
-
Machine is fitted with one main air supply regulator to regulate your cleaning process
-
Low maintenance hinges and latches for lifetime durability
-
Clear visibility of the entire blasting chamber for easier processing
-
Durable 40 mil thick seamless rubber gloves
-
Durable Lexan Window for easy replacement
Meet the Micro Vapor Hone, your compact companion for surface treatment.
Engineered by Vapor Honing Technologies, this budget minded machine will bring some serious potential to your projects. Perfect for hobbyists and small-scale craftsmen, the Micro Vapor Hone is designed to handle your parts the same way our larger machines would. Whether you are blasting carburetors, machines parts, or gold rings, this machine will provide the coveted Vapor Honing finish every time.
Elevate your potential with the Micro Vapor Hone today!
Remember to get your blasting abrasive!
For any questions, please call 828-202-5563
VHT products are built to last at a reasonable price. Highly recommend to anyone looking at wet blast systems.
Mark S,
Arizona
The baddest little machine on the planet. Cannot beat the value for the money just will not happen anywhere else. Very capable product 5 stars. Thanks again VHT!
James A,
Alabama
- What’s the regular maintenance on vapor blasters as a whole?
- How often do I change media and water?
- Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heating?
- Can I use 80 grit glass beads without clogging the pump and what kind of finish will I expect?
- With the current pump on this unit is it possible to get a bigger gun for a larger spray?
- Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.
- If you use it every other day I would change every month. If its occasional use you might go 2-3 months.
- One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing anything other than water and abrasive because it can create bad finishes if it throw’s out the PH of the slurry.
- I would only use the fine mesh glass bead it works the best with this machine but also gives the best finishes possible with vapor honing.
- No, this is the best engineered setup for the pump that will perform the best.
Lets Dive Deep Into The Micro Vapor Hone:
In the autumn of 2018 the first Micro Vapor Hones were constructed, making their debut at the Barber Vintage Festival and heralding a new category of surface finishing equipment. Its compact design, impeccable results, and budget-friendly pricing immediately captivated enthusiasts and professionals alike. At a mere $999, the Micro Vapor Hone offers unbeatable value. Delivered pre-assembled, this machine is ready for action, allowing you to dive into blasting right away.
What sets the Micro apart is its ability to achieve the same high-quality finishes as our larger models but at a fraction of the cost. This makes it perfect for anyone who is processing smaller parts such as carburetors, dental equipment, or jewelry. Additionally, its ease of operation is unparalleled — requiring only compressed air, it can find a place in any workshop corner, ensuring efficient blasting without breaking the bank.
One of its most compelling features is eligibility for our trade-up program. Imagine this: you invest in the Micro and, after six months, realize your needs have grown. With our program, the entire amount you paid for your Micro can be applied towards a larger machine, ensuring you always have the right tool for your projects.
Our lifetime warranty and live customer support are also included with this machine, meaning struggling to keep your machine running or to understand it will never be a problem.
It has never been easier to achieve the incredible results Vapor Honing has to offer, and it is all thanks to the Micro Vapor Hone. To take your craft to the next level, and experience the power of performance, pick up a Micro Vapor Hone today and improve your tomorrow.
Don’t wait, start getting the results you need, today!
Getting Started
For any questions, please call 828-202-5563.
