-
Our Vapor Hone 800 Base is backed up by the industry’s best LIFETIME WARRANTY
-
100% built in the USA
-
American tech support Monday – Friday
-
Our rugged polymer makes the vapor honing process quieter due to its noise absorption properties
-
Window Rinse is standard
-
LED lighting for better visibility
-
Boron Carbide blasting gun inserts
-
Internal part rinse nozzle
-
Durable 40 mil thick seamless rubber gloves
-
1x 2′ LED light bar for better visibility
-
VH800 Base machines are open loop meaning they need a fresh water connection and customer supplied bin or drain
-
Built from rugged polymer
-
Attach your own supplied pressure regulator to your machine using the supplied 1/4″ NPT connection
-
Quick and easy pressure control using the air regulator up front
-
Fresh water connection will be connected at the back of the unit using our designated hose and GHT fitting
-
Durable Lexan Window
-
Right-hand side load door
-
Aircraft grade aluminum door for better sealing and durability
-
Comes with GFCI 110V plug
-
Fully factory tested and assembled
| Internal Working Dimension | 33″ W x 30″ D x 28″ H |
| Power | 110V or 220v Single Phase |
| Abrasives Amount | 25lbs. of Abrasive |
| Water Amount | 18 Gallons |
| Pump | High Volume Slurry Pump |
| Gun Tips | Boron Carbide Blasting Gun Tips |
| Compressor Specs | 7.5HP or Larger |
| CFM | 20-30 CFM |
| PSI | 60-100 PSI |
| Assembly | No Assembly Required |
Great machine built with pride in the USA.
Jerry J,
Georgia
No surprises here along with quick customer service for my replacement parts.
Jimmy K,
Oregon
Company Reviews
The Vapor blaster works just as i hoped it would. Killer finish and Ive been using it for 5 years. i made some mods A blasting pistol holder for keeping it at one spot inside, added an air line with a blower inside. Both easy and i see they sell a clamp now too.
The Hydro Blaster...
The Single best parts cleaner I have EVER used in my whole career. I've used every kind of parts cleaner and they're all crap compared to this machine. I love it. High temp, easy cleaner, super high pressure. I recommend it to EVERYONE. No other parts cleaner leaves your parts this clean. I also use it after vapor blasting to get all the glass out.
Eventually i'm going to cook a steak sous vide in it...
The both have lifetime warranties and thats great as they replaced the LED lights in them both. Super easy to deal with them.
At some point Id like to get a lower end blaster as well just to use with garnet or silica carbide...
Recommend them!
Vapor Honing Questions
1. What’s the regular maintenance on vapor blasters as a whole?
2. How often do I change media and water?
3. Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heating?
4. What abrasives can I run in the vapor hone?
5. Does vapor honing take a lot of CFM?
1. Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.
2. If you use it every other day I would change every month. If its occasional use you might go 2-3 months.
3. One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing any thing other than water and abrasive because it can create bad finishes if it throws out the PH of the slurry.
4. Any abrasive that you run in a dry blasting cabinet will run in a vapor hone machine.
5. It depends on what you define as a lot any wet cabinet can need 15-45 CFM to operate just depends on what machine model you choose.
