fbpx

Hydro Blast- High Pressure Parts Washer

  • Our Hydro Blast high pressure parts washer is backed by the industry’s best LIFETIME WARRANTY
  • 100% built in USA
  • American tech support Monday – Friday
  • Right hand side load door
  • LED for great visibility
  • Built from rugged polymer
  • Adjustable spray wand for fan to fine point spray adjust ability
  • Digital temp readout for precise temp control
  • Auto shut off timer kills all heater power for safety
  • Two cartridge filters clean and strain the parts washing fluid for longer operating life of cleaning agents
  • Service connections are on the back of the machine for easy access. Our simplistic design allows for lifelong lasting performance
  • 1/4″ NPT air connection is located on front left leg for main air connection
  • Window wiper for great visibility is standard on this machine
  • This machine is fitted with our heated hopper for hot washing solution which melts oil and grease on contact

Equipment Specs

Internal working Dimensions 33″ W x 30″ D x 28″ H
Power 220V Single Phase
Abrasives Amount NO ABRASIVE
Water Amount 18 Gallons
Pump Low Volume High Pressure Pump
Compressor Small Air Compressor Needed (15 CFM)
PSI 1700 PSI Max Pressure
Assembly No Assembly Required

Optional Features

Locking caster kit

500lbs capacity stainless steel turntable

Hydro Blast Part washer

Customer Reviews

Are you tired of your old beat up low pressure or hand scrubbing parts washer? I was and when I first used this machine it blew me away at how fast and easy it cut through grease and grime. Cant go wrong with the Hydro Blast machines they are built to last and ship quickly for a custom hand made product.

James S,

South Carolina

Could believe the time Ive been spending just washing parts by hand. I thought I needed an automatic washer but this thing is so fast I don’t have to wait around anymore on my parts to be cleaned.

Tim S,

Arizona

Frequently Asked Questions

  1. What’s the regular maintenance on the Hydro Blast as a whole?
  2. How often do I change the water and cleaner?
  3. Is this machine good for post cleaning after vapor honing?
  1. Really just changing the water and cleaning agent that’s it.
  2. When the tank starts getting dirty or smells its time to change. We recommend once every month.
  3. Yes, the high pressure heated liquid helps flush out those tight spots for the cleanest part possible.
lifetime warranty
design in USA
SiteLock