| Internal Working Dimension | 33″ W x 30″ D x 28″ H |
| Power | 110V Single Phase or 220V |
| Abrasives Amount | 25lbs. |
| Water Amount | 18 Gallons |
| Pump | High Volume Slurry Pump |
| Pump Impeller | Industrial Polyurethane Pump Impeller |
| Gun Tips | Boron Carbide Blasting Gun Tips |
| Compressor Specs | 5 HP or Larger |
| CFM | 20-30 CFM |
| PSI | 60-100 PSI |
| Assembly | No Assembly Required |
Optional Features
220V 50/60 Hz.
Locking Caster Kit
Rubber lined walls for abrasion resistance and noise suppression
1,000 lbs. capacity stainless steel turntable
-
The VH800FL Pro is backed up by the industry’s best LIFETIME WARRANTY
-
100% built in the USA
-
American tech support Monday – Friday
-
Can upgrade to a bigger machine without depreciation
-
Model is built to last
-
Machine can be stainless steel or carbon steel
-
Foot switch operated blasting gun for simple process control
-
Precision air regulator
-
Comes with 40 mil thick rubber gloves
-
Automatic overflow valve
-
Simple Electrical box to simplify wiring process
-
Comes with GFCI 110V plug
-
This machine can be an open loop or closed loop system
-
The VH800FL Pro is fully factory tested and assembled before shipping
-
Window rinse
-
Window wiper
-
2x LED light bar for best visibility
-
Rinse nozzle
-
Boron Carbide blast gun inserts for long-lasting performance
GET YOURS TODAY
1. What’s the regular maintenance on vapor blasters as a whole?
2. How often do I change media and water?
3. Can I mix in something to stop freezing in the winter if I don’t have the unit in a place with heating?
4. What abrasives can I run in the vapor hone?
5. Does vapor honing take a lot of CFM?
1. Really just changing the water and abrasive that’s it. Consumables will last much longer in the wet systems due to the cushioning effect.
2. If you use it every other day I would change every month. If its occasional use you might go 2-3 months.
3. One of the most frequent questions that I don’t have a good solution for other than draining the machine if you know it will be sitting for more than a week in the cold weather. I personally try to minimize mixing any thing other than water and abrasive because it can create bad finishes if it throws out the PH of the slurry.
4. Any abrasive that you run in a dry blasting cabinet will run in a vapor hone machine.
5. It depends on what you define as a lot any wet cabinet can need 15-45 CFM to operate just depends on what machine model you choose.
If you like to see other machines in action or our before and after results, please visit our YouTube channel and subscribe
Click Below
